SeleCTech L-Bar Sealer and Heat Shrink Tunnel - Shrink Wrap Machine

SeleCTech L-bar Sealer and Heat Shrink Tunnel 

The SeleCTech L-Bar Sealer and Shrink Tunnel have a power takeaway conveyor, so when the L-Bar has cut and sealed the film around the item, it is transported into the heat shrink tunnel. The Heat Shrink Tunnels allow for more control of the temperature inside the Heat Tunnel and directional airflow, improving the presentation of the finished packs. Two models in the SeleCTech range are a combination of L-Bar Sealers and Heat Shrink Tunnel. The most popular is the Standard manual model, and then there is the Pneumatic model that uses air to bring down the Sealing arm with a foot pedal, allowing the operator to use both hands when handling the packs that need to be shrink-wrapped. The SeleCTech Tunnels come standard with active rolls though out the tunnel. Both models in this SeleCTech range have a sealing area in the L-Bar of 400mm (W) x 550mm(L) x 150mm (H), while the shrink tunnel is 400mm (W) x 200mm (H). Power requirements 415V, 3 Phase.